Uncategorized
Always use the new nut supplied
The original mounting stud nut may not thread correctly or may damage the new shock or strut upper mounting stud threads. The threads in a...
Do not use pliers or vise grips on the polished shaft
They will score the polished chrome shaft. This will cause increased wear on the upper seals and may lead to a hydraulic fluid leak from...
Can vehicles equipped with electronic or air suspension be converted to use standard gas shocks or struts?
Yes, KYB offers conversion units for some vehicles. Check whether your year/make/model is covered in our online catalog.
Always use a torque wrench for the upper strut shaft mounting nut
Using an air or electric impact wrench to tighten the upper mounting nut on the piston rod can exceed the recommended torque and cause damage....
95–99 Nissan Maxima rear strut installation
These vehicles require special spring-to-strut mounting procedures. Improper assembly can cause excessive side strain and strut failure. If the lower mounting bushing and bolt do...
Note the overall length difference
Replacement shocks and struts may differ in length from the original equipment units. In some cases the replacement unit may be longer to help protect...
Never replace just one shock or strut
To ensure the vehicle performs safely and as designed, always replace shocks or struts in pairs. When damping rates differ significantly from side to side,...
Are there any differences between KYB shocks & struts manufactured in the US vs other countries (such as Japan)?
No. All KYB products are designed at the KYB world R&D offices, and every KYB manufacturing plant then builds each product to the designed specifications....
