Uncategorized
Be aware of upper mounting stud length differences
Mounting stud lengths may differ slightly but should still mount correctly. The most common difficulty occurs when trying to install the mounting nut while the...
Do I need to align my wheels after replacing my struts?
It depends on the vehicle design. A strut, by design, supports the wheel and tire. Some models aren’t affected when the struts are replaced, while...
Nissan Maxima mount alignment
Position the upper strut mount relative to the lower mount as shown in installation illustrations. The left and right sides are different. Proper alignment allows...
KYB internal bumper stop design
Some KYB shocks include an improved internal bumper stop to cushion extreme movements. This may change the total length before installation, but the shock will...
Why would I hear clunking noises even though my shocks/ struts are new?
This is usually caused by a mounting problem, not by the shock or strut itself. Check the components that attach the shock or strut to...
Is the shock/strut weak or defective if I can compress it easily by hand?
Not necessarily. You cannot judge the strength or condition of a shock or strut by compressing it with your hands. The fluid valves are calibrated...
Diagnosing noise after installation
If clunking or rattling occurs after installation and the strut mount and spring seat clock position are correct, inspect other suspension components. Stabilizer bar bushings...
Fastening points may seem misaligned
What may appear to be a mis-positioned welded spring seat may actually require repositioning the upper mount rubber insulator. In some installations the insulator must...
