Always use a torque wrench for the upper strut shaft mounting nut
Using an air or electric impact wrench to tighten the upper mounting nut on the piston rod can exceed the recommended torque and cause damage. Correct tightening is accomplished by holding the piston rod with a wrench or special tool (not vice grips or pliers) at the machined shoulder and using a torque wrench set to the vehicle manufacturer’s specification.
Categories
Replacement shocks and struts may be different lengths than the OE units. In some instances, a unit may be longer…
Most shocks and struts come with loose parts, including nuts, washers, spacers, and possibly a bumper. Before installing the shocks…
To ensure the vehicle performs safely and as designed, always replace in pairs. When damping rates differ significantly from side…
Mounting stud lengths may differ slightly, but all should mount correctly. The most common difficulty occurs when trying to install…
During installation, what sometimes appears to be a mis-positioned welded spring seat may actually be caused by the need to…