Don’t add fluids when replacing a KYB cartridge-style strut
Mechanics sometimes find the strut body filled with fluid when replacing a cartridge. Do not add water, oil, or any other liquids inside the strut housing when installing a KYB cartridge. Remove any existing fluid before installing the new cartridge, as KYB cartridges are designed to operate without additional liquids.
Categories
The original mounting stud nut may not thread correctly or may damage the new shock or strut upper mounting stud…
They will score the polished chrome shaft. This will cause increased wear on the upper seals and may lead to…
Using an air or electric impact wrench to tighten the upper mounting nut on the piston rod can exceed the…
These vehicles require special spring-to-strut mounting procedures. Improper assembly can cause excessive side strain and strut failure. If the lower…
Replacement shocks and struts may differ in length from the original equipment units. In some cases the replacement unit may…